Cricut Heat Presses & Sublimation Printer

The Learning Lab features one Cricut EasyPress 2, one Cricut Mug Press, and one Sawgrass SG500 Sublimation Printer. 

• Cricut EasyPress 2
  • Ceramic-coated 12 X 10-inch press plate
  • Press Temperature: up to 400℉ 
  • Fabrics must be at least 65% polyester for sublimation
  • Compatible with most major brands of iron-on materials
• Cricut Mug Press
  • Mug Sizes: 11 - 16 oz (350 - 470 ml) straight wall only; 82 - 86 mm diameter mugs (3.2 - 3.4 in)
  • Straight-wall tumblers under 3.4 inches in diameter can be pressed, however they will be pressed one half at a time due to the height of the press. A silicone sublimation tumbler wrap is required to sublimate tumblers to meet diameter requirements. 
  • Mugs and tumblers must be labeled "sublimation coated" or "sublimation ready" 

Important Information

• Sublimation is not an exact science- fabric type, color, temperature, and time settings can greatly impact final results. We recommend bringing extra project materials to test on for best results. 
• If sublimating designs, they must be printed using the Sawgrass Sublimation Printer. Printed images from other printers will not be accepted.
• The cost to print a design is $1.00 per sheet. Sheets are standard copy paper size, 8.5X11 inches.  
• If using iron-on materials, the materials must be approved by Learning Lab staff before use.
• Heat transfer tape, parchment paper, and heat-resistant gloves are provided. 
• To use the heat presses and sublimation printer, patrons must have a valid Hickory Public Library card and complete a brief orientation to ensure proper use and safety.

Tips

• Higher percentages of polyester in fabrics produce brighter designs.
• Dark-colored materials will not sublimate well, and designs may not show up, so opt for lighter-colored materials for the best results.